X1-EM proximity reader utilizes EM technology to read contactless EM cards. This reader is suitable for access control, time and attendance and others card control system. Wiegand output model interfaces with all existing Wiegand protocol access control systems. This reader has no logo inside, suitable for OEM customers.
Specifications
Power Requirements
9-12V DC at 100mA. A linear regulator is recommended.
Interface
Standard wiegand 26 bits for connection to standard access control panels.
RS-232 interface -> baud rate : 9600, data bits : 8, stop bit : 1, parity : N
for connection to PC’s or dedicated microcontrollers.
RS232 output data format (Hex) : AA B1 B2 B3 B4 B5 CS BB in Hex format
AA : BOF, B1 to B5 : 16 HEX code, CS : B1 xor B2 xor B3 xor B4 xor B5, BB : EOF
B1 to B5 equal the card 40 bit serial no.
Read Range
Safety read range for 7cm with standard EM H4100 card.
Frequency
125kHz standard
Operating temperature
-22° to 150° F (-30° to 65° C)
Operating humidity
0-95% relative humidity non-condensing
Audio/visual Indication
Green, Red , Yellow led bar and Buzzer
Dimensions
95 mm x 45 mm x 15 mm
Response Time
Less than 0.1 sec
Cable distance
Wiegand interface: 500 feet (150 m)
RS232 interface: 50 feet (15 m)
Recommended cable is ALPHA 1295 (22 AWG) 5 conductor minimum stranded with overall shield or equivalent. Additional conductors may be required for LED or beeper control.
http://product.yktchina.com/2013-02/d8cedcbaa5cdacd1.html